zither table

Have you constructed a zither, case, table or other zither accessory? Share your photos and lessons learned here.

Moderator: Dave

Post Reply
Rudy Mueller
Posts: 437
Joined: Thu Sep 08, 2011 8:33 am

zither table

Post by Rudy Mueller » Sat Oct 01, 2011 12:27 pm

the attachment (hope it comes through) is of the latest built here. the dimensions are (depth x width x height ) 19.5 x 31 x 23.5 inches, or
50 x 78.5 x 60 cm

the frame is 1/4 inch (6 mm) oak, and the top is 1/8 inch (3 mm) oak veneer plywood. legs are common oak bannister spindles. weight is approximately 4 pounds 8 ounces or 2.0 kg, without notestand.

the attachment was taken at a camera setting of 1.5 mp.

rudy mueller
Attachments
100_0977.JPG
100_0977.JPG (465.07 KiB) Viewed 1232 times

Post Reply