the attachment (hope it comes through) is of the latest built here. the dimensions are (depth x width x height ) 19.5 x 31 x 23.5 inches, or
50 x 78.5 x 60 cm
the frame is 1/4 inch (6 mm) oak, and the top is 1/8 inch (3 mm) oak veneer plywood. legs are common oak bannister spindles. weight is approximately 4 pounds 8 ounces or 2.0 kg, without notestand.
the attachment was taken at a camera setting of 1.5 mp.
Have you constructed a zither, case, table or other zither accessory? Share your photos and lessons learned here.
1 post • Page 1 of 1